Project Overview
A manufacturing customer in China required a compact permanent magnetic chuck for a welding application. The key requirement was to achieve a specified magnetic holding force while maintaining the original Ø130 mm outer diameter.
MAGWORK developed a radial-pole magnetic chuck configuration around these dimensional and performance requirements, with particular attention to the customer's lateral force specification.
The Workholding Challenge
Higher Holding Requirements Within a Fixed Diameter
The customer needed a magnetic holding solution that could meet a 150 N force requirement without increasing the chuck's outer diameter.
This created two important engineering considerations: maintaining the required magnetic performance within a limited working area and accounting for lateral forces during the intended operation.
Simply increasing the chuck size was not an option. The magnetic circuit and pole arrangement therefore became central to the proposed configuration.
MAGWORK's Solution
Radial Pole Arrangement Within Ø130 mm
MAGWORK selected a radial magnetic pole configuration for the custom permanent magnetic chuck.
The radial arrangement provides a magnetic circuit layout suited to the circular chuck geometry, allowing the design to be developed around the specified diameter rather than requiring a larger holding surface.
Magnetic Performance Matched to the Application
The chuck configuration was developed around the customer's specified 150 N magnetic force requirement.
By considering the pole arrangement and available magnetic contact area together, the design focused on achieving the required holding characteristics within the compact chuck dimensions.
Additional Consideration for Lateral Forces
The project also included a 60 kgf lateral force requirement, making resistance to sideways movement an important part of the engineering evaluation.
The proposed workholding arrangement therefore considered lateral loading alongside magnetic attraction, rather than relying on a nominal pull-force specification alone.
Looking for a Custom Magnetic Holding Solution?
Need a magnetic chuck with special dimensions, a radial pole arrangement, or application-specific holding requirements?
MAGWORK helps evaluate custom permanent magnetic chuck configurations based on your workpiece, available installation space, and operating conditions.
Share your drawing and technical requirements to explore a suitable magnetic workholding solution.

