Project Overview
A metalworking project required a custom electro-permanent magnetic chuck for grinding large, heavy steel plates. Unlike conventional grinding applications, the primary concern was not simply magnetic holding force, but maintaining a level and stable working surface under substantial workpiece weight.
MAGWORK proposed a 600 × 600 × 200 mm electro-permanent magnetic chuck configuration with Ø80 mm circular magnetic poles, addressing the customer's requirements for magnetic holding and structural stability.
The Workholding Challenge
Heavy Workpieces Put More Than Magnetic Holding to the Test
When grinding thick steel plates, substantial workpiece weight places additional pressure on the magnetic chuck's working surface and internal pole structure.
The customer was particularly concerned that heavy loading could cause the magnetic poles to tilt, compromising the levelness of the supporting surface.
For precision surface grinding, this presents an important engineering challenge. Even with sufficient magnetic attraction, uneven support can affect workpiece positioning and the consistency of the grinding setup.
The solution therefore needed to consider both magnetic holding performance and the structural support required for heavy workpieces.
MAGWORK's Solution
Custom 200 mm-High Chuck Configuration
MAGWORK proposed a custom electro-permanent magnetic chuck measuring 600 × 600 × 200 mm.
The specified 200 mm height formed an important part of the fixture configuration, providing the design envelope for the magnetic system and supporting structure.
For this application, the chuck construction needed to account for the concentrated weight of thick steel plates while maintaining the required working-face geometry.
Ø80 mm Circular Magnetic Pole Arrangement
The proposed design featured Ø80 mm circular magnetic poles with a specified magnetic force of 150 N.
The circular pole arrangement was selected as part of the custom electro-permanent magnetic chuck configuration, allowing magnetic contact and workpiece support requirements to be considered together.
For heavy steel plate grinding, pole positioning and structural rigidity are important considerations in maintaining a stable workholding arrangement.
Designed Around Working-Surface Stability
A key focus of the engineering proposal was the customer's requirement to prevent magnetic pole tilting under heavy loads.
Rather than evaluating the chuck solely by its magnetic force rating, the proposed configuration considered the relationship between workpiece weight, magnetic pole structure, and the levelness of the working surface.
This application illustrates why heavy-duty magnetic workholding requires attention to both magnetic performance and mechanical support.
Looking for a Magnetic Chuck for Heavy Workpieces?
Grinding large steel plates or working with heavy components that place additional demands on your magnetic chuck?
MAGWORK helps evaluate custom electro-permanent magnetic chuck configurations based on workpiece weight, contact conditions, machine requirements, and structural support needs.
Share your workpiece drawing and grinding requirements to explore a suitable magnetic workholding solution.

