Project Overview
A machine tool distributor in Malaysia approached MAGWORK for a large electro-permanent magnetic chuck solution intended for a milling and material-cutting application.
The project required a 1000 × 2000 mm magnetic workholding area, a fixed chuck height of 120 mm, and magnetic performance exceeding the customer's minimum 150 N requirement.
Rather than offering a single standard configuration, MAGWORK developed two alternative magnetic chuck arrangements, allowing the customer to compare modular construction with a one-piece design.
The Workholding Challenge
Large Working Area, Strong Magnetic Holding, Limited Installation Height
Large-scale milling applications require a workholding surface that can accommodate substantial workpieces while providing reliable magnetic contact across the usable area.
For this project, the customer had three specific requirements: a 1000 × 2000 mm working area, magnetic force greater than 150 N, and an overall chuck height of 120 mm.
Meeting these requirements involved more than increasing the magnetic chuck dimensions. The design also needed to consider magnetic pole distribution, structural configuration, and the practical arrangement of the control system.
The key engineering decision was whether to achieve the required working area through multiple connected magnetic modules or a single large electro-permanent magnetic chuck.
MAGWORK's Solution
Option 1 — Modular Electro-Permanent Magnetic Chuck System
The first proposed solution consisted of four electro-permanent magnetic chuck modules, each measuring 500 × 1000 × 120 mm.
Together, the four modules form the required 1000 × 2000 mm magnetic workholding area.
A single controller was proposed to operate all four modules, creating a coordinated one-controller, four-chuck configuration.
The modular arrangement provides flexibility in manufacturing, handling, and installation while maintaining the required overall working area.
Proposed Configuration:
Four magnetic chuck modules: 500 × 1000 × 120 mm each
Combined working area: 1000 × 2000 mm
Control arrangement: One controller for four modules
Power supply: 220 V
Option 2 — One-Piece Electro-Permanent Magnetic Chuck
The second proposed solution used a single electro-permanent magnetic chuck measuring 1000 × 2000 × 120 mm.
This configuration provides a continuous chuck assembly across the required working area, with one controller dedicated to the complete magnetic system.
The one-piece design offers an alternative for applications where an integrated magnetic workholding structure is preferred over multiple individual modules.
Proposed Configuration:
Magnetic chuck dimensions: 1000 × 2000 × 120 mm
Control arrangement: One controller for one chuck
Power supply: 415 V
Magnetic Pole Design and Performance Requirements
The project specified a 75 + 25 mm magnetic pole configuration and a magnetic performance value of 170 N, above the customer's minimum requirement of 150 N.
Both proposed arrangements were developed around the specified working area, height restriction, and magnetic holding requirements.
By presenting two structural options, MAGWORK provided the customer with a basis for evaluating installation preferences, system configuration, and project requirements before final selection.
Need a Large Custom Magnetic Chuck for Your Milling Machine?
Standard magnetic chucks may not accommodate oversized workpieces, special machine dimensions, or demanding holding requirements.
MAGWORK helps develop custom electro-permanent magnetic workholding solutions, from modular magnetic chuck assemblies to large one-piece configurations.
Share your machine dimensions, workpiece drawings, and required magnetic performance to explore a suitable solution for your application.

